Failed root disk replacement in SVM

Wednesday, December 21, 2011 at 4:46 AM
Step1: Backup of the current SDS configuration:
[root]# metastat -p >> /etc/lvm/md.tab
removal of replicas stored on this disk
[root]# metadb -d c1t0d0s4
Step2: detach and deletion of sub mirror d11 (swap)
[root]# metadetach d1 d11 && metaclear d11
Step3: disk removal
[root]# luxadm remove_device /dev/rdsk/c1t0d0s2
WARNING!!! Please ensure that no file systems are mounted on these device(s). All data on these devices should have been backed up.
The list of devices which will be removed is:
1: Device name: /dev/rdsk/c1t0d0s2 Node WWN: 2000000c504fd050
Device Type: Disk device
Device Paths: /dev/rdsk/c1t0d0s2
Please verify the above list of devices and then enter c or to Continue or q to Quit. [Default: c]:c stopping: /dev/rdsk/c1t0d0s2.... Done
offlining: /dev/rdsk/c1t0d0s2.... Done
The drives are now off-line and spun down.
Physically remove the disk and press the Return key.
Hit after removing the device(s).
Note: Disk has to be physically removed before pressing "ENTER" when running luxadm remove_device; otherwise, picld will notify the kernel that the drive was not removed and WWN of this drive will remain in the loop -- and the FCAL subsystem may get confused, especially if recommended patches are out of date
[root]# devfsadm -C -c disk
Step4: Insertion of the new disk drive:
<<< physical insertion >>>
[root]# devfsadm -v
Step5: partitioning:[root]# prtvtoc /dev/rdsk/c1t1d0s2 fmthard -s - /dev/rdsk/c1t0d0s2
Step6: adding SDS replicas :
[root]# metadb -ac 3 c1t0d0s4
Step7: resynchronization :
[root]# metainit d11 && metattach d1 d11
[root]# for i in 0 3 6 ; do metareplace -e d$i c1t0d0s$i ; done

0 comments

Post a Comment

Solaris | Powered by Blogger | Entries (RSS) | Comments (RSS) | Designed by MB Web Design | XML Coded By Cahayabiru.com