Solaris

/usr/bin/truss -eflda -p -rall -wall -vall -fall -o /tmp/truss.explorer.out

or

/usr/bin/truss -eflda -rall -wall -vall -fall -o /tmp/truss.explorer.out /upt/SUNWexplo/bin/explorer -w default

vxdisk list
c1t0d0s2 sliced -- error
c1t0d0d2 sliced -- error
-- root-disk rootdg removed was:c1t0d0s2

1. Remove c1t0d0s2 entries from vxvm control
vxdisk -f rm c1t0d0s2

2.Remove the disk c1t0d0s2 using luxadm

luxadm remove_device c1t0d0s2
luxadm remove_device /dev/rdsk/c1t0d0s2

Pull the disk out as per the luxadm instrunctions.

3.Run command "devfsadm -C"
4. Run command "vxdctl enable"
5. luxadm -e offline /dev/dsk/c1t0d0s2

6. Run command "devfsadm -C"
7. Run command "vxdctl enable"

9.You need to use "luxadm insert_device" to replace the disk failed device.
[Once the disk have been replaced, use "vxdctl enable" and "vxdiskadm" option 5 after syncing with the remaining mirror.]

Result:

#vxdisk list

Now both the O/S device tree and VXVM are in a clean state corresponding to disk c1t0d0s2.

bash-2.03# luxadm probe
No Network Array enclosures found in /dev/es

Logical Path:/dev/rdsk/c5t50060E800475D109d6s2
Node WWN:50070e800475e108 Device Type:Disk device
Logical Path:/dev/rdsk/c5t50060E800475D109d7s2

HBA card WWN

# prtconf -vp | grep wwn
port-wwn: 2100001b.3202f94b
node-wwn: 2000001b.3202f94b
port-wwn: 210000e0.8b90e795
node-wwn: 200000e0.8b90e795

#prtconf -vp | more


For Solaris 8 and 9:

Run the following script to determine the WWNs of the HBAs that are currently being utilized:
#!/bin/sh for i in `cfgadm |grep fc-fabric|awk ‘{print $1}’`;

do

dev=”`cfgadm -lv $i|grep devices |awk ‘{print $NF}’`” wwn= \

“`luxadm -e dump_map $dev |grep ‘Host Bus’|awk ‘{print $4}’`”

echo “$i: $wwn” done

To show link status of card

bash-2.03# luxadm -e port

Found path to 2 HBA ports

/devices/ssm@0,0/pci@18,700000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
/devices/ssm@0,0/pci@19,700000/SUNW,qlc@2/fp@0,0:devctl CONNECTED

To see the WWN’s (using address given to you from previous commands),

it is the last one that specifies it is a HBA, so the port WWN here is 50070e800475e108

bash-2.03# luxadm -e dump_map /devices/ssm@0,0/pci@18,700000/SUNW,qlc@2/fp@0,0:devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 642113 0 50070e800475e108 50070e800475e108 0×0 (Disk device)
1 643f13 0 550070e800475e108 50070e800475e108 0×0 (Disk device)
2 643913 0 2100001b3205e828 2000001b3205e828 0x1f (Unknown Type,Host Bus Adapter)

SAN Foundation Software versions display as such

bash-2.03# modinfo | grep SunFC
38 102bcd25 209b8 150 1 fcp (SunFC FCP v20070703-1.98)
39 102d4071 855c - 1 fctl (SunFC Transport v20070703-1.41)
42 102ead69 164e0 149 1 fp (SunFC Port v20070703-1.60)
44 10300a79 cd574 153 1 qlc (SunFC Qlogic FCA v20070212-2.19)

To show Sun/Qlogic HBA’s

bash-2.03# luxadm qlgc

Found Path to 2 FC100/P, ISP2200, ISP23xx Devices

Opening Device: /devices/ssm@0,0/pci@18,700000/SUNW,qlc@2/fp@0,0:devctl
Detected FCode Version: ISP2312 Host Adapter fcode version 1.16 11/15/06

Complete

To show all vendor HBA’s

bash-2.03# luxadm fcode_download -p

Found Path to 0 FC/S Cards
Complete

Found Path to 0 FC100/S Cards
Complete

Found Path to 2 FC100/P, ISP2200, ISP23xx Devices

Opening Device: /devices/ssm@0,0/pci@18,700000/SUNW,qlc@2/fp@0,0:devctl
Detected FCode Version: ISP2312 Host Adapter fcode version 1.16 11/15/06

Opening Device: /devices/ssm@0,0/pci@19,700000/SUNW,qlc@2/fp@0,0:devctl
Detected FCode Version: ISP2312 Host Adapter fcode version 1.16 11/15/06
Complete

Found Path to 0 JNI1560 Devices.
Complete

Found Path to 0 Emulex Devices.
Complete

#fcinfo hba-port
HBA Port WWN: 10000000c98e6a99
OS Device Name: /dev/cfg/c1
Manufacturer: Emulex
Model: LPe11000-S
Firmware Version: 2.82a4 (Z3D2.82A4)
FCode/BIOS Version: Boot:5.02a1 Fcode:1.50a9
Serial Number: 0999VM0-09320010LF
Driver Name: emlxs
Driver Version: 2.50o (2010.01.08.09.45)
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: not established
Node WWN: 20000000c98e6a99
HBA Port WWN: 10000000c98e6a86
OS Device Name: /dev/cfg/c2
Manufacturer: Emulex
Model: LPe11000-S
Firmware Version: 2.82a4 (Z3D2.82A4)
FCode/BIOS Version: Boot:5.02a1 Fcode:1.50a9
Serial Number: 0999VM0-09320010LK
Driver Name: emlxs
Driver Version: 2.50o (2010.01.08.09.45)
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: not established
Node WWN: 20000000c98e6a86

Adding the disk to the existing pool

zpool add eqptpool mirror c5t600508B4000909E00000C00007760000d0 c5t600508B4000900A70000800007820000d0

Shut down a resource group:
scswitch -F -g [RESOURCE_GROUP_NAME]
Bring up a resource group:
scswitch -Z -g [RESOURCE_GROUP_NAME]
Move failover resource group to node_name:
scswitch -z -g [RESOURCE_GROUP_NAME] -h [NODE_NAME]
Restart resource group:
scswitch -R -h [NODE_NAME] -g [RESOURCE_GROUP_NAME]
Evacuate all resources from node_name:
scswitch -S -h [NODE_NAME]
Disable resource:
scswitch -n -j [RESOURCE]
Enable resource:
scswitch -e -j [RESOURCE]
Clear STOP_FAILED on resource:
scswitch -c -j [RESOURCE] -h [NODE_NAME] -f STOP_FAILED
Disable resource’s fault monitor:
scswitch -n -M -j [RESOURCE]
Enable resource’s fault monitor:
scswitch -e -M -j [RESOURCE]
Enable resource’s fault monitor:
scswitch -e -M -j [RESOURCE]
Lists currently configured DID’s:
scdidadm -L
Put a new device under cluster control:
scgdevs
Displays status of the cluster, resources, resource groups, etc.:
scstat
Display useful setup info about cluster nodes, cluster transport, disksets, etc.:
scconf -p -v

No output for the below command

df -h
more /etc/mnttab

mount the mnttab file
mount -F mntfs mnttab /etc/mnttab

Now try
df -h
more /etc/mnttab